Download PARTS LIST Aluminum wheel (The illustration may differ from the actual wheel.) Wheel center cap (The illustration may differ from the actual center cap.) Center cap emblem 2 Push nuts Wheel cleaning information TPMS Information (Give this information to your customer.) Parts for TPMS sensor assembly Tire pressure sensor assembly Washer Valve cap Valve nut TOOLS AND SUPPLIES REQUIRED Ratchet wrench 11 mm Socket Torque wrench Isopropyl alcohol Shop towel HDS TPMS sensor initializer tool AKS0620006 INSTALLATION NOTE: •This aluminum wheel is designed for use on TPMS (Tire Pressure Monitoring System) vehicles. •This aluminum wheel is equipped with the TPMS sensor. See the Service Manual for tire replacement procedure and TPMS sensor installation procedure. •The illustration of the aluminum wheels shown are for reference purposes only. •Install the correct size tire. •Use a tire changer to remove and install the tires. Using a tire lever to remove and install the tires can damage the tire, the wheel, and the TPMS sensor. •The wheel nut torque is 108 N·m (80 lbf-ft). •Be careful not to damage the wheel center cap when installing the emblems. •This center cap emblem kit should be installed only if the ambient air temperature is 60°F (15°C) or above. •To allow the adhesive to cure, do not wash the vehicle for 24 hours. 1. Before installing the tire pressure sensor, clean the mating surface and the valve hole of the aluminum wheel. 2. Install the tire pressure sensor to the aluminum wheel and loosely install the valve nut. Make sure the pressure sensor is resting on the wheel. 3. Tighten the valve nut to the specified torque while holding the tire pressure sensor toward the wheel. Tightening torque: 4 N·m (3 lbf-ft). NOTE: •Do not reuse the grommet that had been tightened, even one time, to the specified torque, as they are deformed inside. •Do not use pneumatic or electric tools on the valve nut. •Tightening the nut to the specified torque or above can damage the grommet. •Make sure that there is no space between the sensor and the wheel. 4. Install the tires according to the instructions in the Service Manual.
The post 2009 Honda CR-V 17″ ALUMINUM WHEEL INSTALLATION INSTRUCTIONS appeared first on ToManual.com.